Posted by MRB

Cable marker with lettering and sign as shown in Appendix B1 and Appendix B2 shall be provided by the Electrical Contractor at every change in direction of underground cable routes and at every 15 m on straight run. Cable markers shall be of heavy duty reinforced concrete construction and approved by the S.O.’s Representative.
The cable marker shall be of trapezoidal block with 100 mm square top face, 150 mm square bottom face and 400 mm in height as shown in Appendix B3. The top face shall be indented with bold lettering ‘L.V.’ and directional sign indicating the direction/directions of the cable route.
Thecable marker shall be fully painted orange using standard road paint. The cable marker shall be buried to a depth of 300 mm. Cable joint marker of similar construction but with the lettering and sign as shown in Appendix B3 shall be provided and installed at every cable joint in the similar manner.

Comments on 'CABLE MARKERS' (3)

  1. I was very happy to find this internet-site.I needed to thanks on your time for this glorious read!! I definitely enjoying every little bit of it and I’ve you bookmarked to take a look at new stuff you weblog post.

  2. Can I simply say what a relief to find somebody who truly is aware of what theyre speaking about on the internet. You undoubtedly know the best way to bring an issue to mild and make it important. Extra individuals have to read this and understand this aspect of the story. I cant consider youre no more popular since you undoubtedly have the gift.

  3. come here says:

    zCIwPT Your style is so unique compared to other folks I have read stuff from. I appreciate you for posting when you have the opportunity, Guess I all just book mark this page.

Leave a Reply