Posted by MRB

During the Defects Liability Period, the Electrical Contractor shall be responsible for making good all defects for the complete installation. The Electrical contractor shall bear all cost incurred to rectify the defects.
The rectification work to be performed shall include but not limited to the following:-
(a) Replacing or making good all regulators, control gears, capacitors, reactors, fuses, mccb, contactors, etc.
(b) Replacing and making good all loose and burnt cables and termination, all mechanical support linkage, etc.
(c) Making good any damage to roads, buildings, drains, cables, pipes, concrete areas, paved areas etc. which had not been properly made good arising out of his work.
(d) All other works as deemed necessary by the S.O.’s Representative.
All works shall be carried out as soon as the Electrical Contractor is informed by the S.O.’s Representative or the occupant and shall be completed within a reasonable time except under emergency situation as stipulated in the Supplementary Conditions for Electrical Work. If the Electrical Contractor fails to comply with the above requirements, the S.O.’s Representative reserves the right to engage another party to carry out the work, in which case, the Electrical
Contractor shall be responsible for all the expenses incurred.



Leave a Reply